Aluminum Oxide Point Bud
Move up to a Aluminum Oxide Mounted Point Bud carving stone that cuts faster. The Mounted Point stone is good for rounding edges and surface finishes, or hard to reach difficult tight and narrow angels. Use the coarse grit for general shaping and delicate texturing and fine grit for smoothing and texturing soft carving woods . The carving stone hold their shape extremely well. Grits are identified by color. Coarse is red which aggressively removes tough material such as steel and pliable iron. Fine is white for extremely fine cutting and high finish on hard material including gemstone, stainless steel, and glass. Use the carving stone for medium to fine finishing with subtle texture or mini carvings with basswood and other softwood projects . You can use the Aluminum Oxide Point Bud with Foredom, Dremel, and other power rotary tools. The Aluminum Oxide Mounted Point Bud carving stone works great for all your detailing projects.
Aluminum Oxide Point Bud Specifications:
- 1/4" diameter head x 1/4" long head.
- Coarse (Red)120 grit.
- Fine (White) 400 grit.
- 1/8" Shank.
- Mounted Point Bud.
- Total length of Carbide Bur including shank and head about 1-7/8".
- Maximum Speed of 35,000 rpm.
- Made in the USA.
Use the Aluminum Oxide Point Bud to remove:
- Malleable Iron.
- Soft Wood.