Colwood 45° Small Rounded Heel Woodburning Tip
The Colwood 45° Small Rounded Heel Woodburning Tip is used to create details under the neck or inside leg joints. with a 45° bend. These Colwood Replaceable tips can also follow concave surfaces without digging into the wood. Most Tips when held at a 45° angle to the wood and rotated between the thumb and fingers allows you to use the tip as a calligraphy tip , creating thick lines or graceful curved lines. With the 45° tip it is already bent making it easier to create those special effects without holding your hand in an awkward position. The fine narrow tip reaches a higher heat than the wide tips. When the fine tip burns it's a darker impression , and the wide tips will burn lighter impression.
It is very Important that you specify which tip you need: Left tip is for right handed wood burning and right tip is for left handed wood burning.
Colwood 45° Small Rounded Heel Woodburning Tip Specifications:
- 3/16" Small Rounded Heel.
- 45° angle.
- Woodburning Replaceable Tip.
- Manufacturer; Colwood.
There are a few ways to keep your tip clean , use a leather honing strop, with aluminum oxide. Simply place a small amount of oxide on the strop and pull the woodburning tip across the strop surface or use a sanding stick with 320 grit to clear the tip of carbon while restoring them to a bright finish that creates clean strokes.
- 1.00 (in)
- 3.50 (in)
- 0.50 (in)