Product Description
Euro 1/4 HP Flexible Shaft Kit
An economical workhorse that is fast and affordable! Featuring Euro Tool 1/4 HP Flexible Shaft Machine, this versatile machine can be used for many applications, such as sanding, polishing, cleaning, drilling and more. Fully interchangeable unit with standard style handpiece. Variable speeds up to 22,000 RPM. In revolutions per minute, the speed at which the shaft turns the bur. This flexible shaft motor is 110 volts/60 Hz.
It comes with a sturdy hard case made of durable hard plastic.
1/4 HP Flexible Shaft Motor Details
With the European 1/4 HP Flexible Shaft Machine, you can quickly and effectively remove wood on roughouts and cut outs. The higher the speed, the cleaner the cut for fine details.
The motor is a forward motor only. Using the foot control with this motor will ensure that it is operating at its full capacity. When plugging the motor into the foot control, an on/off and variable speed switch will be available. This Euro Tool Flex Shaft Machine motor comes pre-lubricated.
Replace motor brushes when they are worn to 1/4". When the motor brushes are new, they are approximately 3/4" long. Removing the brushes is a simple task. Simply unplug the motor to access the brushes.
Euro Tool Chuck Style Handpiece
This kit includes a chuck style hand-piece with a chuck key. The hand-piece accepts shafts up to 5/32" in diameter. All you have to do is slide the bur or drill bit into the three jaw chuck that is precision geared and tighten with the chuck key (like a drill press).
Using Euro Tool's chuck hand-pieces is easy. The hand-piece is permanently lubricated and ready to use. Just connect the hand-piece to the shaft using the grooved quick connect fitting on the sheath. As with all flexible shaft tools, make sure the curved tip is properly aligned with the slot.
Euro Tool Foot Pedal
This application makes life easier by using a foot pedal. Simply plug the motor into the foot pedal and the plug from the foot pedal into your electric receptacle. Press down on the pedal to start the motor. Using the foot pedal, you can control the speed of the motor, up to a maximum of 22,000 revolutions per minute.
Euro 1/4 HP Flexible Shaft Machine is used for:
- Cutting.
- Sanding.
- Shaping.
- Sharpening.
- Grinding .
- Polishing.
Included with the Euro Tool 1/4 HP Flexible Shaft Kit:
- The 1/4HP motor with Flexible shaft and sheath.
- Chuck style Handpiece with a chuck key.
- Extra set of motor brushes.
- Allen Wrench.
- Foot Control with Variable Speed.
- Booklet of Instructions.
- Hard Plastic Carrying Case.