Product Description
This is the Ram 3/32" collets that is only for use with the Ram Optimus handpiece.
If you are right-handed hold the lower ½ of the handpiece in your left hand
1 – make sure the blank mandrel or a bur smaller than 1/8” head diameter is inserted in the chuck as this will help support the 3 chuck walls
2 – turn the middle plastic set ring clockwise towards you until it clicks and is in the open position
3 - use the chrome metal chuck wrench tool included in all handpieces and take the wrench and place the triange cut out over the chuck
4 – turn the wrench tool counterclockwise away from you
You should start to feel the chuck unscrewing and it takes about 10m turns to remove the chuck