Typhoon Carbide Bur 3/8" Flame
Move up to a Typhoon Carbide Bur that cuts faster and lasts longer. The Typhoon Carbide Bur 3/8" Flame has a unique structure with hundreds of extremely sharp tungsten carbide teeth. The Typhoon carbide bur is very aggressive and stays sharp a lot longer than regular burs. Use the Typhoon Carbide Bur for shaping and roughing out work on hard or soft wood and other materials. Grits are identified by color. Coarse is red which aggressively removes material leaving a deeper groove. Fine is blue which runs slower for more control leaving a smoother finish as if it was sanded. The pattern of regular spaced teeth aligned in rows make the carving burs less prone to load yet easier to clean. You can use the carving burs with Foredom, Dremel, and other rotary tools. The manufacturer recommends using a brass brush to rapidly remove any build up if needed. Don't use a file card or steel brush to clean Typhoon Carbide Bur Flame.
Typhoon Carbide Bur 3/8" Flame Specifications:
- 3/8" diameter head x 3/4" long head.
- Coarse (Red) or Fine (Blue).
- 1/4" Shank.
- Total length of Carbide Bur including shank and head about 3".
- Maximum Speed of 25,000 rpm.
- Made in the USA.
Use the Typhoon Carbide Bur 3/8" Flame to remove:
- Hard Wood.
- Soft Wood.
- Hard Rubber.