Typhoon Carbide Bur 9/16" Sphere
Move up to a Typhoon Carbide Bur that cuts faster and lasts longer. The Typhoon Carbide Bur 9/16" Sphere has a unique structure with hundreds of extremely sharp tungsten carbide teeth. The carbide carving burs are very aggressive and stay sharp a lot longer than regular burs. Use the coarse grit for shaping and roughing out work and fine grit for decorative features on hard or soft wood and other various materials. Grits are identified by color. Coarse is red which aggressively removes material and leaves deeper grooves. Fine is blue which gives a bit more control as it moves slower for more detailed work leaving a smoother finish as if it was sanded. The pattern of regular spaced teeth aligned in rows make the burs less prone to load yet easier to clean. The manufacturer recommends using a brass brush to rapidly remove any build up if needed. Don't use a file card or steel brush to clean Typhoon Carbide Bur Sphere. You can use the Typhoon carbide bur sphere with Foredom, Dremel, and other power rotary tools.
Typhoon Carbide Bur 9/16" Shpere Specifications:
- 9/16" diameter head x 1/2" long head.
- Coarse (Red) or Fine (Blue).
- 1/4" Shank.
- Total length of Carbide Bur including shank and head about 2".
- Maximum Speed of 25,000 rpm.
- Made in the USA.
Use the Typhoon Carbide Bur 9/16" Shpere to remove:
- Hard Wood.
- Soft Wood.
- Hard Rubber.