ANTLER ART FOR BASKETS AND GOURDS-SLOAN

64pp 169 photos: Enhance your gourd vessel or basket with antlers. Containing 169 color images and step-by-step instructions, learn how to drill, frame, and attach antlers to a traditional weave basket, gourd bowl, floor vases, and even masks. Twenty...

In Lace Techniques: Resin Inlay For Gourd & Woodcafts

63pp. 198 photos: This is the first comprehensive book written on the uses of InLace resin inlay for gourd artists and wood turners. Chapters present carving techniques in gourds, mixing resin, insetting, sanding, and polishing. Step-by-step directions...

"PEAR COPPER" 1 1/2" LOOP TOOL

This tool will help you clean out the gourd.

POTTER'S NEEDLE

The large, 1 5/6" long, sharp, heat-treated steel needle is set in a 1/2" diameter hardwood handle for a sturdy grip.  Gourder's will use this tool to make holes for sinew if weaving on a gourd.

MICROLUX COARSE GOURD BLADES - 10 PACK

10 pack of coarse replacement blades for the Microlux Gourd Saw

BIRD HOUSE SCRAPING TOOL

The small head and curved shank of this scraper let's you get inside of a gourd using only a 1" hole.

1 1/4" BALL CLEANER - COURSE - 5/16" x 11" SHAFT

These coarse-grit ball cleaners work very quickly when cleaning out a gourd that is full of gunk inside. Get the fine-grit one (732103) if there isn't a lot to clean out. The 5/16" shaft holds up under aggressive use when chucked into your hand drill.

1 1/4" BALL CLEANER - FINE - 5/16" x 11" SHAFT

These fine-grit ball cleaners work very quickly when cleaning out a gourd that isn't too messy inside. Get the coarse-grit one (732104) if there is a lot to clean out. The 5/16" shaft holds up under aggressive use when chucked into your hand drill.

TRANSLUCENT PYROPAPER - 50 SHEETS

You can print or trace a picture on this paper, tape it to your project and burn right through it. 50 Sheet pack. 8 1/2" x 11".

PROXXON 50/EF ROTARY TOOL W/ FINGER CHUCK - 12 VOLT

Diameter of 1 3/8" and a weight of only 8 oz. make this tool easy to handle. Electronic speed control 5,000 - 20,000 rpm. Requires a transformer to run.  The optional power source is a Micromot AC Adapter NG 5/E

PROXXON 5 AMP TRANSFORMER

Electronic speed control. Capacity of 5.0A @ 16V no load and 12 Volt under load = 60VA (DC). 3 polarized sockets for multi tool use. A master switch allows the transformer to be turned off without needing to unplug. If you're looking for max - power.....

GOURD DRILL

Lightweight and Precise - 15,000 rpm Drill. Universal chuck accepts up to an 1/8" shank. Requires Gourd Tool Power Supply (572105).