Ram Bit and Bur Box

Show off all your bits and burs in the Ram Bit and Bur Box. This box holds up to 231 different size bits and burs.  RAM CARRY BIT CASE FEATURES:• The Perfect On-The-Go Companion• Dimension: 9.25" Width x 8" Length x 2.35"...

Ram Slim Nose Handpiece with 3/32" collet

The Ram 35000 RPM Slim Nose Handpiece is a high-quality tool that offers superior performance and durability making it perfect for woodworking projects. The slim nose design allows for greater precision and control, while the high speed motor...

Ram Brushes for 45 handpiece

Update your brushes in your Ram 45 handpiece using the Ram square carbon brushes. For use with the Optimus handpiece only.  Carbon brushes are rated at approximately 1,000 hours We suggest to periodically check the brushes are wearing evenly and...

Ram On/Off foot switch for Ram 45

The Ram On/Off Foot Pedal is a great upgrade to your Ram 45 motor. This foot pedal accessory will allow the user to turn the handpiece on/off as set.  ON/OFF FOOT PEDAL SPECIFICATIONS:• 4 inch Length x 2 1/2 inch Width x 1 1/4 inch...

Ram Carry Bag

Going to a show or a class what better way to take your micromotor with you than in the Ram carry bag. This heavy duty blue bag fits your micromotor and handpiece nicely with it measuring 10 inches x 7 inches x 3 inches. It features heavy duty zippers,...

Ram 1/8" Collet for Optimus Handpiece

With the Ram 1/8" collet it should only be used in the Ram Optimus handpiece.  If you are right-handed hold the lower ½ of the handpiece in your left hand 1 – make sure the blank mandrel or a bur smaller than 1/8” head diameter...

Ram 3/32 Collet For Optimus Handpiece

This is the Ram 3/32" collets that is only for use with the Ram Optimus handpiece.  If you are right-handed hold the lower ½ of the handpiece in your left hand 1 – make sure the blank mandrel or a bur smaller than 1/8” head...

Foredom 2" Typhoon Fine Disk

Typhoon 2" Flat Face Fine Disc If you're looking for a powerful way to carve your projects, the Typhoon 2" Flat Face Fine Disc is perfect for you. This disc has a 3/8" arbor hole and is designed for use with the Foredom Angle Grinder. With its...

Foredom 2" Velcro Loop Disc 5 Pack

Foredom Foot Control for TX, TXH, LX and LXH Motors

The Foredom foot control is made of a cast iron metal housing. This foot control is a heavy, durable and long lasting foot control. You can use this particular foot control with the following Foredom 115 volt TX and LX motors. Models M.TX, M.TXB, M...

Foredom 12 piece Chisel Set in Pouch

Need some new chisels? Why not get the chisels in canvas pouch so you can safely carry them with you. The Foredom chisel set is a canvas pouch that nicely fits a 12 different chisels. it has a velcore closure so your tolls do not fall out.  The...

Foredom Variable Speed Foot Pedal

With the Foredom variable speed foot control you have added stability and control of the speed of your handpiece. This foot control has a heavy cast iron metal housing and is very durable.  This foot control is only for use with the discontinued...