Mandrels, Arbors & Chucks

Foredom Micro Chuck with 3/32" Shank

Foredom Micro Chuck 3/32" Shank Interested in using smaller diameter shank accessories without having to change the collet in your handpiece? A collet adapter is a great way to do this. It's called an A-M52 (3/16" head dia.) and it "steps down" the...

Foredom Motor Bale

Foredom Motor Bale for CC and R Motors If you are in need of a new Foredom motor bale, this is it. -This Foredom motor bale fits the discontinued Foredom Motors CC or R. -The bale is the piece that is the top handle on the motor that allows you to...

Mandrel Screw Type with 1/8 shank fits 1/16 Arbor M-15

Mandrel Screw Type with 1/8 shank fits 1/16 Arbor hole This mandrel can be used for the 9/16" and 3/4" Radial discs.

Large Split Sanding Mandrel

Large Split Sanding Mandrel  The Large Split Sanding Mandrel  has a 3/32" shank.

5/16 Large Head Mandrel

5/16 Large Head Mandrel  The 5/16 Large Head Mandrel has a 3/32" shank.

Mandrel for Large Guge Sander

Mandrel for Large Guge Sander This mandrel fits the large Guge Sanders perfectly.  Simply twist them onto the 3/32" mandrel and you are ready to do some precision fine sanding.  Smooth out your carving projects rapidly and easily.

Mandrel for Small Guge Sander

Mandrel for Small Guge Sander The screw mandrel you have may look like the one for the smaller Guge-Sanders™ but this is a perfect fit.  This mandrel for the Guge Sanders has a 3/32" shank and fits both the small Guge Sanders and the Guge...

Ram 3/32 - 1/16 Adapter Sleeve

Ram 3/32 - 1/16 Adapter Sleeve

Ram 1/8-3/32 Adapter Sleeve

Ram 1/8-3/32 Adapter Sleeve

Tapered Mandrel M-17

Tapered Mandrel M-17  Tapered Mandrel M-17 have a  reinforced base allowing the user to wind sandpaper, polishing cloth, or other abrasives on a disk.  This Foredom Mandrel is good for finishing smooth surfaces while the tapered...

Screw Type Mandrel M-6

Screw Type Mandrel M-6   The Screw Type Mandrel M-6  is good for finishing smooth surfaces while the tapered offers access to undercuts. Maximum and recommended speeds depend on the type and size of accessory, as well as the...

Screw Type Mandrel M-2

Screw Type Mandrel M-2   The Screw Type Mandrel M-2  is good for finishing smooth surfaces while the tapered offers access to undercuts. Maximum and recommended speeds depend on the type and size of the accessory, as well as the...